Idesco DISPLAY -Desfire/Mifare -OSDPv2 - 3m kabel
ATTENTION
Sold while stocks last.
NOTE.
Requires NOX R9 for active display.
The reader will work on NOX R8, but only with a static display (e.g. company logo - must be setup by ARAS).
Display readers have clear advantages, but depending on the environment and intended use, also disadvantages.
We recommend talking to ARAS before purchasing.
Desfire / Mifare reader with 2.4" color display
This display reader offers completely new possibilities in relation to providing detailed and individual information to users.
Functions
- DESFire reader with 2.4 inch color display
- The display can always be read, even in sunlight
- Secure, flexible and highly configurable reading technology
- Practical mechanical keyboard with raised keys and freely programmable function keys
- Provides more detailed feedback when reading cards (e.g. Access granted / Access denied)
- High degree of user interactivity (via keyboard and function keys)
- Supports OSDP v.2.1.7
Technical data
- Frequency: 13.56 Mhz
- Voltage: +10 ... +30 VDC
- RFID chip support: MIFARE® DESFire Ev1: UID + Application files, MIFARE® Classic: UID + Sectors, MIFARE® Ultralight UID + Pages, MIFARE® Plus UID security levels 1 and 3, MIFARE® SmartMX (MIFARE® Classic emulation mode) , NFC (UID), Mifare Classic 7 Byte UID + sectors. Mifare DESFire Ev2: UID+application files
- Antenna: Internal
- Keyboard: 3 x 4 mechanical keyboard with three additional function buttons
- Dimensions: 155 x 87 x 20 mm (hxwxd)
- Material: Plastic
- Protection class: IP67
- Operating temperature: -30 °C - +55 °C
- RS-485: OSDPV2.1.7, Idesco RS485
- Screen resolution: 320x240
- Screen lifetime: 50,000 hours
- I/O: 2 FET outputs, 1 General purpose input
- Encryption: AES or triple DES between card and reader, secure channel between reader and system (OSDPV2.1.7)
- Cable: 3 meter pigtail
- LED: 3 x three colors - controlled via protocol
- Buzzer: Yes - controlled via protocol
- Optical tamper: Yes
- Keyboard backlight: Yes - controlled via protocol
The reader is supplied as a standard reader.
The reader can be changed and configured completely according to the end user's wishes, but you must expect an additional price for changes, configuration and installation of special software if you do not want to use it with the standard configuration.
Mounting height:
Display readers require a higher mounting height to make functional sense.
ARAS recommends a height of at least 160 cm, or the use of angled mounting accessories.
