Idesco Quat VM - Mif/Desfire Custom -Pin CON OSDP
Idesco VM card reader with keypad.
OSDPv2 and Connector setup
- Operating Frequency: 13,56MHz
- Voltage: +10 .... +30 VDC
- Current Consumption: 45mA @ 24VDC, max 90mA
- RFID chip support: MIFARE® DESFire EV1 & EV2 & EV3: UID + Application files , MIFARE® Classic: UID + Sectors, MIFARE® Ultralight UID + Pages, MIFARE® Plus UID security levels 1 and 3, MIFARE® SmartMX (MIFARE® Classic emulation mode).
- Additional Security feature for DESfire: Support for DESFire EV1 & EV2 & EV3 Random UID
- UID selection: Reader can be configured to read either 4 or 7 Byte UIDs, or both.
- Keypad: 3 x 4 (mechanical)
- Dimensions of housing (hxwxd): W: 84,48 mm x H:126,25 mm. Thickness: 28 mm (with cable), 28 mm + 8,5 mm (with connector)
- Material of housing: Plastic
- Colour: Black
- Customized versions: Yes, with sticker or lens
- Protection class IP67: with the pigtail cable option, IP54: with the connector option
- IK rating: IK-09
- Operational temperature range: -30 °C- +55 °C
- Storage temperature range: -30 °C- +55 °C
- I/O’s: 2 (1 General purpose input)
- Interfaces:OSDP v2
- EMC: Meets CE requirements
- Field strength: According to EN300330
- Encryption: AES or triple DES
- Connector: Yes
- Led: RGB
- Led control: By wire
- Buzzer: Yes (Buzzer modes can also be configured)
- Buzzer control: By wire
- Optical Tamper: Yes, configurable
- Re-read delay: Adjustable
- Configuration Only one DESfire EV1 / EV2 / EV3 conf card required
Configure only after reset option - Value file support: Reader can be set to credit / debit value from value file cards
