STID Architect - BLE-QR-DISPLAY- OSDP - Mifare

Print PDF

NOTE.
Requires NOX R9 for active display.
The reader will work on NOX R8, but only with keyboard function on the display.

Display readers have clear advantages, but depending on the environment and intended use, also disadvantages.
We recommend talking to ARAS before purchasing.

STid Architect card reader with Touch screen display, QR reader module and Bluetooth.

Patented accelerometer based tamper technology.

Bluetooth and NFC Technology for smartphones.

5 different identification modes for smartphone access.

• Operating frequency/Standards: 13.56 MHz. ISO14443 types A & B, ISO18092, Bluetooth
  
• Chip compatibility: MIFARE® Ultralight® & Ultralight® C, MIFARE® Classic & Classic EV1, MIFARE Plus® (S/X) & Plus® EV1, MIFARE® DESFire® 256, EV1 & EV2, CPS3, NFC (HCE),PicoPass® (CSN only), iCLASS™ (CSN only*)
  
• Communication interfaces & protocols: TTL Data Clock (ISO2) or Wiegand (ciphered mode - S31) / RS232 / RS485 (ciphered mode - S33) with secure communication protocols SSCP & SSCP2 ; OSDP™ V1 (plain communication) & V2 (SCP secure communication)
  
• Touchscreen: Color touch screen - 2,8" - 240 x 320 pixels
  
• Touchscreen keypad: 12 backlit keys - Standard or Scramble pad mode
  
• Touchscreen keypad functions: Card AND Key / Card OR Key
  
• Touchscreen setup: Configuration by RFID, Bluetooth® using the STid Settings App, UHF technology, software and external command (0V)
  
• Configuration by RFID card, software or UHF technology according to the interface
  
• Reading distances: Up to 6 cm with a MIFARE® Classic card, Up to 4 cm with a MIFARE Plus® / DESFire® EV1 card - Up to 20 m with a Bluetooth® smartphone (adjustable distances on each reader)
  
• Read/Write: Read only - available in Read/write option (Please ask ARAS)
  
• Light indicator: 2 RGB LEDs - 360 colors, Configuration by RFID, Bluetooth® using the STid Settings App, UHF technology, software and external command (0V)
  
• Audio indicator: Internal buzzer with adjustable intensity, Configuration by RFID, Bluetooth® using the STid Settings App, UHF technology, software and external command (0V)
  
• Power requirement / Power supply: 220 mA/12 VDC Max / 7 VDC to 28 VDC
  
• Connections: 10-pin plug-in connector (5 mm) / 2-pin plug-in connector (5 mm): O/C contact - Tamper detection signal
  
• Data protection: EAL5+ Secure data storage with certified crypto processor
  
• Material: ABS-PC UL-V0 (black)
  
• Dimensions (h x w x d): 128 x 80 x 31 mm
  
• Operating temperatures: -20°C to + 70°C / Humidity: 0 - 95%
  
• Tamper switch: Accelerometer-based tamper detection system with key deletion option (patented solution) and/or message to the controller
  
• Protection / Resistance: IP65 Level excluding connector, Weather-resistant with waterproof electronics
  
• Mounting: Compatible with any surfaces and metal walls without spacer - Wall mount/Flush mount:- European 60 & 62 mm
  
• Certifications: CE & FCC

Mobile ID: 

• Badge mode
• Slide mode
• Tap tap mode
• Hands-free mode
• Remote mode

The reader is supplied as a standard reader.
The reader can be changed and configured completely according to the end user's wishes, but you must expect an additional price for changes, configuration and installation of special software if you do not want to use it with standard configuration.

Mounting height:
Display readers require a higher mounting height to make functional sense.
ARAS recommends a height of at least 160 cm, or the use of angled mounting accessories.