STID Architect - Standard - OSDP - Mifare- Display

Print PDF

NOTE.
Requires NOX R9 for active display.
The reader will work on NOX R8, but only with keyboard function on the display.

Display readers have clear advantages, but depending on the environment and intended use, also disadvantages.
We recommend talking to ARAS before purchasing.

STid Architect card reader with Touch screen display.

Modularity concept allows you to add extra new functions: keyboard, touch screen or biometric fingerprint sensor.

Patented accelerometer based tamper technology.

NFC Technology for smartphones.

• Operating frequency/Standards: 13.56 MHz. ISO14443 types A & B, ISO18092
  
• Chip compatibility: MIFARE® Ultralight® & Ultralight® C, MIFARE® Classic & Classic EV1, MIFARE Plus® (S/X) & Plus® EV1, MIFARE® DESFire® 256, EV1 & EV2, CPS3, NFC (HCE),PicoPass® (CSN only), iCLASS™ (CSN only*)
  
• Communication interfaces & protocols: TTL Data Clock (ISO2) or Wiegand (ciphered mode - S31) / RS232 / RS485 (ciphered mode - S33) with secure communication protocols SSCP & SSCP2 ; OSDP™ V1 (plain communication) & V2 (SCP secure communication)
  
• Touchscreen: Color touch screen - 2,8" - 240 x 320 pixels
  
• Touchscreen keypad: 12 backlit keys - Standard or Scramble pad mode
  
• Touchscreen keypad functions: Card AND Key / Card OR Key
  
• Touchscreen setup: Activated/deactivated by card and UHF technology in R3x/S3x - By software-configuration in W3x
  
• Configuration by RFID card, software or UHF technology according to the interface
  
• Reading distances: Up to 6 cm with a MIFARE® Classic card, Up to 4 cm with a MIFARE Plus® / DESFire® EV1 card
  
• Read/Write: Read only - available in Read/write option (Please ask ARAS)
  
• Light indicator: 2 RGB LEDs - 360 colors, Configuration by RFID card, software, external command (0V) according to the interface
  
• Audio indicator: Internal buzzer with adjustable intensity, Configuration by RFID card, software, external command (0V) according to the interface
  
• Power requirement / Power supply: 130 mA/12 VDC Max / 7 VDC to 28 VDC
  
• Connections: 10-pin plug-in connector (5 mm) / 2-pin plug-in connector (5 mm): O/C contact - Tamper detection signal
  
• Material: ABS-PC UL-V0 (black)
  
• Dimensions (h x w x d): 128 x 80 x 31 mm
  
• Operating temperatures: -20°C to + 70°C / Humidity: 0 - 95%
  
• Tamper switch: Accelerometer-based tamper detection system with key deletion option (patented solution) and/or message to the controller
  
• Protection / Resistance: IP65 Level excluding connector
  
• Mounting: Compatible with any surfaces and metal walls without spacer - Wall mount/Flush mount:- European 58 & 60 mm
  
• Certifications: CE, FCC & UL

Mobile ID: 

• Badge mode
• Slide mode
• Tap tap mode
• Hands-free mode
• Remote mode

Mounting height:
Display readers require a higher mounting height to make functional sense.
ARAS recommends a height of at least 160 cm, or the use of angled mounting accessories.